1.Remotely upload a new GPS schedule to collar or backpack

We think this is unknown because we never actually advertised it nor included it in our user manual. When some of our customers discovered on their own that it was possible they remarked to us, “Wow, we like this but didn’t™ know we could do it.” The reason that we decided not to advertise it in the first place is because after you change from the original to the modified GPS schedule the original GPS battery life estimation is out the window because the new schedule is different from the original and that changes estimated battery life. So if you change the GPS schedule be careful and pay attention to the new battery life estimate… and make that new schedule include the original schedule up to the date that you changed it, that will make the battery life estimation correct.

2. Increase GPS precision without affecting worse case battery life estimation

To understand this one you need to understand something we call GPS timeout. GPS timeout is a limit that you set prior to deploying the GPS in the field. This setting limits the amount of time that the GPS is allowed to remain on while attempting a GPS location. There are 3 choices, 60, 90 and 120 seconds. Let’s™ assume that you set your GPS for a 60 second timeout.

When your scheduled time for a GPS position attempt arrives the GPS will turn on. And it will remain on for some number of seconds that it needs in order to produce that GPS position but it won’t™ go past the GPS timeout which was 60 seconds. The estimated battery life calculated by the user software before you deployed will have made the assumption that each time the GPS turns on it uses those entire 60 seconds. But in fact that’s™ not going to happen, many times the GPS will turn off well before 60 seconds and you will still have a GPS position. Therefore the estimated battery life is based on using the entire GPS timeout each and every time the GPS comes on.

Stay with me, we’re™ almost there. Let’s™ talk about how precision and time to fix are related. When the GPS turns on and off in a short period of time, let’s™ say 15 seconds… that GPS location will be good but not as precise as it could be. But sometimes 15 seconds are all that is needed to obtain a GPS location. When this happens the GPS turns off and just does not use that other 45 seconds that were available according to your 60 second GPS timeout setting. But if you use our ˜GPS additional time™ feature and set it to 45 seconds, for example, then when the GPS would still have acquired that position within those 15 seconds rather than turn off, the GPS will remain on for an additional 45 seconds. That position is going to be far more precise than the position that was acquired and written to memory after 15 seconds. But the GPS will not remain on for longer than your GPS timeout and therefore your estimated battery life calculation is still valid! This costs nothing; it is included in the user software. We call this GPS additional time. Click here to watch video.

3. Extend GPS battery life by up to 9 times without a heavier battery

Before you deploy your GPS tracking device you will obviously set up a GPS positioning schedule so that your device will come on at the appointed times and attempt a GPS position. But if you study an animal that spends a lot of time resting in a place where a GPS location is unlikely, a fisher inside a tree hollow or a rabbit underground for example, the GPS may turn on when the animal is in one of these resting places. If that happens your GPS device will be wasting battery when it turns on to take a location without being able to acquire GPS signals. For you this is totally wasted battery life, you get nothing for it. But we have a way that you can program that GPS position but the GPS won’t attempt that position if the animal is found in the condition described above. We call this Smart GPS and this is how it works.

The basic function can be described as a 3-axis accelerometer informing the microprocessor about movement levels and using that information to determine whether or not to attempt the next scheduled GPS attempt or to save the battery usage and just skip it.

There are 4 parts to Smart GPS

• A minimum activity level that must be exceeded in order for the next GPS to take place. In this way you are in control over what constitutes a resting animal.
• A counter which keeps track of instances of this minimum activity level being exceeded. In conjunction with the minimum activity level above this gives you more control over what constitutes a resting animal.
• A function that enables you to choose when the “instances of exceeded activity level” counter resets back to 0. This helps you to protect your data set from just being totally empty in the case that you set either the minimum activity level too high or the counter too high.
• A function that temporarily disables Smart GPS based upon movement information. This function protects you in the case that you set the activity level and counter too high. To elaborate, before deployment you will set all of these parameters. Setting the minimum activity level is done simply by inputting an arbitrary number into the software. This number represents an activity level that must be exceeded so that Smart GPS won’t™ take effect. The user software enables you to see what this number represents in terms of movement because you move the collar while looking at the user software and you can see that number change as movement intensity changes (GPS device connected to PC by USB cable at the time you do this).The counter needs to know the minimum number of instances (x) that the movement intensity described above must be exceeded in order to disable the Smart GPS the next time the GPS should turn on. In other words, since the counter started counting the minimum activity intensity must be exceeded X number of times or else the next scheduled GPS position attempt will be skipped. Another setting allows you to control the way in which the counter resets itself. The counter will always reset after a scheduled GPS location takes place. Other than that your counter works in one of two ways. The first is that it will always reset to 0 at the time of a GPS location that was skipped because the minimum activity level was not exceeded enough times to warrant a GPS location. But what if you set that counter number much higher than you should have? You will be missing out on a lot of GPS data. To protect yourself from this you can choose to have the counter to continue accumulating instances of the minimum intensity occurrences even if the time for the next scheduled GPS instance has arrived and been skipped. Finally, yet another way to protect your data set from the mistake of setting either the minimum activity intensity too high or setting the counter too high. This last feature allows you to force the GPS to totally ignore the Smart GPS feature after X number of consecutive skipped GPS attempts. In other words, the animal has not moved enough to override Smart GPS skip. This can be because the animal really isn’t™ moving much or it could be because your settings are too high. Choose a number from 1 to 99 and use that to program this feature and then the GPS will always turn on after that number of skipped GPS positions regardless of movement. Click here to watch video.

4. The data download can be automated, no need for you to be there

Our Q4000E has the remote data download feature and it works by establishing a UHF connection between the GPS device and something we refer to as a base station. The base station is a transceiver on the same frequency as the transceiver in the GPS device. Normally when you want to obtain GPS data remotely using this system you would locate the animal (probably using the VHF signal) then tell the base station to make a connection to the GPS and download its data. This is achieved by entering into the base station the unique transceiver address of the GPS device in question. Then push one button and the connection is made, the data are transferred to you and the connection is terminated.

If you know where your study animals are going to be you can set up this base station to perform the above task without your physical presence. Understandably this is not practical for every application but for those that it practical for all you have to do to get the GPS data is make a trip out to the base station. Extract the data from the laptop that is running the base station… just plug a flash drive into it, wait for the beep and you are done.

5. Log activity data on your terms not ours

This activity logging feature is made with your needs in mind, not ours. We have designed this feature so that you can set up the activity sensing in a way that best fits your needs. Here are the parameters that you can set. You choose the sampling rate per second, you choose the number of samples that compile into one line of data, you choose an activity threshold below which all movement will be ignored and not counted in the activity log and you set the times in the day for the activity logger to be turned on. By using these settings you can focus on detecting the activity that is most interesting to you. Here is more information about how the activity logger works. (It is all based on a 3 axis accelerometer).

Sampling rates: There are 6 activity sampling rate choices. 4 times per second, 2 times per second, 1 time per second, once every 2 seconds, once every 3 seconds or once every 4 seconds.

Delta Time: You choose how many of these samples are compiled into one line of data in the output. In other words, if you have the accelerometer set to sample activity levels 4 times per second and then you choose to have one line of data represent 60 seconds worth of sampling then in fact that one line of activity data represents 240 instances of activity sampling. Conversely you may choose that 1 line of data is representative of 1 second worth of sampling with in this case would be 4 samples. That allows you either fine scale activity monitoring or coarse scale monitoring.

The user software empowers you to set a level of activity below which activity data will not be recorded even when it occurs. In the case that you are not interested in small movements this allows you to eliminate from your data set those small movements. If you are interested in small movements then you can set this feature to 1 and everything will be logged.

After you have set the activity detection parameters described above you then schedule the times in the day that the activity data will be detected and stored.

6. GPS data can be transmitted by wireless through water

When one of our customers asked us if our UHF remote data download feature worked in water we had to confess that we didn’t™ know because we had never tried it. Well, they did try it and it does work. Watch this video and see their experiment from a kayak on a pond in Australia.

https://www.youtube.com/watch?v=PDyjAMCG7V4

7. Products available with USB port factory sealed

The Telemetry Solutions Q4000E is equipped with a micro USB port which allows you to install the GPS schedule as well as set up all other parameters you need to set. Before the collar is deployed that USB port must be sealed. Because it is not round there is no plug to screw in but rather a 3 step process to make that port waterproof. While this is really a simple process that can be accomplished in 30 seconds we have heard from some customers that they would rather have that port factory sealed and then set all parameters and upload the GPS schedule by UHF wireless in their office. We have been doing this for years but until now it was only done at the request of the customer. From now on it will be part of the initial order, we will ask you which you prefer. Existing customers please note that you do not have to wait for the RTV to dry before applying the epoxy, the RTV does not require air to dry.